Description:

We have 3 size:STD/+25/+50,This is STD2534.75mm/32.75mm,you can choose it according to your need.Compatible with ZR750 Z750 04-12/ ZR750 Z750S 05-07/ ZR750 Z750 ABS 07-12/ ZR750 Z750R 11-12/ ZR750 Z750R ABS 11-12/ ZR750LA Z750 10/ ZR800 Z800 13-16/ ZR800 Z800 ABS 13-16/ ZR1000 Z1000 03-09/ ZR1000 Z1000 ABS 07-09.. High crush for better seating and retentionUnder the condition of good lubrication, the normal wear of the connecting rod bearing is very small. If foreign dust, iron filings or other metal abrasive particles enter between the journal and the bearing bush with the lubricating oil, the bearing bush and the journal will be scratched.. FeaturesThe tile mouth refers to the groove on the connecting rod tile. The function of the tile mouth is to fix the tile, prevent it from being installed backwards during installation, prevent the tile from rotating in the middle of the connecting rod bearing hole, and avoid damage to the tile. Usually the large tile racks are not symmetrical, and the misalignment of the tile mouth will cause the bolts to not be screwed to the end, and at the same time, it is easy to squeeze the tiles.. The connecting rod shell includes the connecting rod upper shell and the connecting rod lower shell, which are installed at the connecting part of the connecting rod and the crankshaft, and play the role of wear resistance, connection, support and transmission. When assembling the connecting rod tile, the upper and lower marks cannot be right or wrong, the direction of the tile mouth cannot be reversed, and the screws need to reach the corresponding torque..